Casella Insight Plug-in for Apex Pro & Tuff Pro Air Sampling Pumps

Item #:

Insight-C

Brand:

Casella

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us

Share this product:

Description

Insight-C Insight Plug-in for Apex Pro & Tuff Pro Air Sampling Pumps by Casella

The Pump Manager Plugin for the Casella Insight software allows measurement results stored in either an Apex or Tuff Pro pump to be transferred and saved in the master database for archival purposes.

Results can be viewed, plotted and output to reports in a wide variety of popular file formats. Gravimetric dust measurements can be integrated into a complete report that also includes real time dust measurements and allocated to specific users or areas on site or for a process.

Key Benefits

Download up to 100 stored events from Pro versions of Apex and Tuff pumps
Setup the pumps with delayed start and stop recording schedules
Program TWA measurements to collect sample for complete day
Store calibration certificates for the pumps together with due dates for recertification
Add results manually from other pumps that do not have automatic download
Add analyte information about samples when back from laboratory

Applications

OSHA and NIOSH air sampling measurements on workers in dirty environments can be downloaded to this Plugin for archiving purposes and reporting. The Pro versions of the Apex and Tuff pumps will save up to 100 events in their memories that record start time, end time, flow rates, total volume to document the sampling that was carried out. Any errors associated with the measurement in terms of flow blockages will also be recorded to alert the user to any unforeseen circumstances that might also have occurred. Data can be entered with the downloaded results once the sample has come back from the analysis laboratory regarding the specific analytes found. The Plugin also allows the user to setup the pump with a fixed duration run timer or delayed start and stop timers to make automatic measurements.

Specifications

Flow Range	Tuff 3 : 0.5 to 3.5 l/min, Tuff 4 : 0.5 to 4.5 l/min. (all variants :5 to 850 ml/min with low flow adaptor).
Flow Control Accuracy	<±5% for selected flow, ±3% for calibrated point
Battery Voltage and Capacity	4.8 V NiMH / 2.7 Ah or 1.7Ah
Inlet Pulsation Ratio	< 10% using Dewell Higgins Cyclone @ 2 L/min approx. 7.5 cm H2O. Satisfies EN1232 , NIOSH 0600
Displayed Values (model dependant)	Real flow rate, volume sampled, elapsed sample time, temperature, operating mode, program details battery fuel gauge, alarm status
Service Interval	Typically 2500 hrs
Operating Temperature	5°C to 45°C
Storage Temperature	-10° to + 50°C
Charging Technique	Drop-in Intelligent fast charger employing dT/dt termination with safety time out. Standby trickle charge mode to keep pump ready for use.
Typical Charge Time (charge time is dependant upon, ambient temperature, discharged state and condition of batteries)	Typically 3 hours under normal operating conditions.
Memory Protection Time with Main Battery Pack Removed	Approximately 20 minutes
Communications	Infrared transducer (via RS232-infrared computer link)
Recorded Values	Start & stop times, flow rate, average sample temperature, volume sampled and errors.
Dimensions	Approximately 133 x 87 x 47mm
Weight (including battery)	Approximately 475 g