Test & Measurement

CM78 1000A AC/DC Clamp with IR by FLIR

The FLIR CM78 is a multifunctional, 1000 Amp Clamp Meter for the electrician who works on high-powered equipment and temperature systems.

Features

• AC/DC (1000A or 1000V): Take accurate AC/DC measurements (up to 1000A or 1000V) safely and quickly on high-powered equipment and complex machinery.
• Non-Contact Safety: Save time by attaching the meter to the target when the panel is de-energized, then measure the active equipment when the panel is closed.
• Spot-Laser IR Thermometer: Quickly scan for hot spots on panels, conduits, and motors using the built-in non-contact IR thermometer.
• Type K Thermocouple: Verify that associated current measurements and temperature readings are correctly aligned and in spec.
• Bluetooth Connectivity: Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
• METERLiNK Compatibility: Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
• Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
• Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

CM78-NIST 1000A AC/DC Clamp with IR and NIST by FLIR

The FLIR CM78 is a multifunctional, 1000 Amp Clamp Meter for the electrician who works on high-powered equipment and temperature systems.

Features

• AC/DC (1000A or 1000V): Take accurate AC/DC measurements (up to 1000A or 1000V) safely and quickly on high-powered equipment and complex machinery.
• Non-Contact Safety: Save time by attaching the meter to the target when the panel is de-energized, then measure the active equipment when the panel is closed.
• Spot-Laser IR Thermometer: Quickly scan for hot spots on panels, conduits, and motors using the built-in non-contact IR thermometer.
• Type K Thermocouple: Verify that associated current measurements and temperature readings are correctly aligned and in spec.
• Bluetooth Connectivity: Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
• METERLiNK Compatibility: Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
• Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
• Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

CM82 Industrial 600A Power Clamp with VFD Mode by FLIR

FLIR offers an excellent choice of industrial-grade Power Clamp Meters engineered with advanced power analysis and variable frequency drive filtering functions required by electrical troubleshooters.

Features

• VFD Mode: Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.
• Harmonics Mode: Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.
• Phase Rotation: Analyze three-phase systems to measure power draw and verify if power is evenly balanced.
• Inrush Current: Measure hard and soft start-up inrush current spikes while equipment is ramping up.
• Power Factor and Active Power: Monitor power quality improvements, such as start-up realignments on three-phase equipment.
• Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
• Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

CM82-NIST Industrial 600A Power Clamp with VFD Mode and NIST by FLIR

FLIR offers an excellent choice of industrial-grade Power Clamp Meters engineered with advanced power analysis and variable frequency drive filtering functions required by electrical troubleshooters.

Features

• VFD Mode: Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.
• Harmonics Mode: Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.
• Phase Rotation: Analyze three-phase systems to measure power draw and verify if power is evenly balanced.
• Inrush Current: Measure hard and soft start-up inrush current spikes while equipment is ramping up.
• Power Factor and Active Power: Monitor power quality improvements, such as start-up realignments on three-phase equipment.
• Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
• Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

CM83 600A Power Clamp by FLIR

The FLIR CM83 is an industrial-grade Power Clamp Meter engineered with advanced power analysis and VFD filtering functions required by electrical troubleshooters.

Features

• VFD Mode: Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.
• Harmonics Mode: Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.
• Phase Rotation: Analyze three-phase systems to measure power draw and verify if power is evenly balanced.
• Inrush Current: Measure hard and soft start-up inrush current spikes while equipment is ramping up.
• METERLiNK Compatibility: Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
• Power Factor and Active Power: Monitor power quality improvements, such as start-up realignments on three-phase equipment.
• Bluetooth Connectivity: Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
• Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
• Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

CM83-NIST 600A Power Clamp with NIST by FLIR

The FLIR CM83 is an industrial-grade Power Clamp Meter engineered with advanced power analysis and VFD filtering functions required by electrical troubleshooters.

Features

• VFD Mode: Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.
• Harmonics Mode: Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.
• Phase Rotation: Analyze three-phase systems to measure power draw and verify if power is evenly balanced.
• Inrush Current: Measure hard and soft start-up inrush current spikes while equipment is ramping up.
• METERLiNK Compatibility: Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
• Power Factor and Active Power: Monitor power quality improvements, such as start-up realignments on three-phase equipment.
• Bluetooth Connectivity: Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
• Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
• Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

CM85 Industrial 1000 Amp Power Clamp with VFD Mode and Bluetooth METERLiNK by FLIR

FLIR offers an excellent choice of industrial-grade Power Clamp Meters engineered with advanced power analysis and variable frequency drive filtering functions required by electrical troubleshooters.

Features

• VFD Mode: Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.
• Harmonics Mode: Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.
• Phase Rotation: Analyze three-phase systems to measure power draw and verify if power is evenly balanced.
• Inrush Current: Measure hard and soft start-up inrush current spikes while equipment is ramping up.
• METERLiNK Compatibility: Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
• Power Factor and Active Power: Monitor power quality improvements, such as start-up realignments on three-phase equipment.
• Bluetooth Connectivity: Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
• Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
• Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

CM85-NIST Industrial 1000 Amp Power Clamp Meter with VFD Mode, Bluetooth METERLiNK and NIST by FLIR

FLIR offers an excellent choice of industrial-grade Power Clamp Meters engineered with advanced power analysis and variable frequency drive filtering functions required by electrical troubleshooters.

Features

• VFD Mode: Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.
• Harmonics Mode: Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.
• Phase Rotation: Analyze three-phase systems to measure power draw and verify if power is evenly balanced.
• Inrush Current: Measure hard and soft start-up inrush current spikes while equipment is ramping up.
• METERLiNK Compatibility: Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
• Power Factor and Active Power: Monitor power quality improvements, such as start-up realignments on three-phase equipment.
• Bluetooth Connectivity: Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
• Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
• Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

DM92 Industrial Digital Multimeter with LoZ and VFD Mode by FLIR

FLIR's latest choice of new world-class digital multimeters offer advanced variable frequency drive filtering to help you accurately analyze non-traditional sine waves and noisy signals.

Features:

VFD Mode

Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.

LoZ Mode

Use the Low Impedance Input filter to eliminate ghost voltage readings in long-run applications.

Bright Dual-LED Worklights

Make your work safer and easier by illuminating dimly lit inspection areas.

Rugged, Shock-Resistant

Double-molded rubber case design enhances reliability on the job site and durability for the long haul.

Convenience Features

• No need to select AC or DC Mode for quick tests
• Backlight features user-configurable timeout
• Large, sharp display is easy to see
• Tool-less battery changing
• Built-in tilt stand

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

DM92-NIST Industrial Digital Multimeter with LoZ and VFD Mode and NIST by FLIR

FLIR's latest choice of new world-class digital multimeters offer advanced variable frequency drive filtering to help you accurately analyze non-traditional sine waves and noisy signals.

Features:

VFD Mode

Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.

LoZ Mode

Use the Low Impedance Input filter to eliminate ghost voltage readings in long-run applications.

Bright Dual-LED Worklights

Make your work safer and easier by illuminating dimly lit inspection areas.

Rugged, Shock-Resistant

Double-molded rubber case design enhances reliability on the job site and durability for the long haul.

Convenience Features

• No need to select AC or DC Mode for quick tests
• Backlight features user-configurable timeout
• Large, sharp display is easy to see
• Tool-less battery changing
• Built-in tilt stand

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

DM93 High Accuracy DMM with VFD Mode by FLIR

FLIR's latest choice of new world-class digital multimeters offer advanced variable frequency drive filtering to help you accurately analyze non-traditional sine waves and noisy signals.

Features:

VFD Mode

Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.

LoZ Mode

Use the Low Impedance Input filter to eliminate ghost voltage readings in long-run applications.

Continuous Data Recording

Detect intermittent glitches by allowing the FLIR DM93 to collect measurement data unattended over time.

Bright Dual-LED Worklights

Make your work safer and easier by illuminating dimly lit inspection areas.

METERLiNK® Compatibility

Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR infrared cameras.

Bluetooth Connectivity

Connect to Android devices for remote diagnostics in hard-to-reach and hazardous areas. Also, upload files without the need for special cords.

Rugged, Shock-Resistant

Double-molded rubber case design enhances reliability on the job site and durability for the long haul.

Convenience Features

• No need to select AC or DC Mode for quick tests
• Backlight features user-configurable timeout
• Large, sharp display is easy to see
• Tool-less battery changing
• Built-in tilt stand

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

DM93-NIST High Accuracy DMM with VFD Mode with NIST by FLIR

FLIR's latest choice of new world-class digital multimeters offer advanced variable frequency drive filtering to help you accurately analyze non-traditional sine waves and noisy signals.

Features:

VFD Mode

Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.

LoZ Mode

Use the Low Impedance Input filter to eliminate ghost voltage readings in long-run applications.

Continuous Data Recording

Detect intermittent glitches by allowing the FLIR DM93 to collect measurement data unattended over time.

Bright Dual-LED Worklights

Make your work safer and easier by illuminating dimly lit inspection areas.

METERLiNK® Compatibility

Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR infrared cameras.

Bluetooth Connectivity

Connect to Android devices for remote diagnostics in hard-to-reach and hazardous areas. Also, upload files without the need for special cords.

Rugged, Shock-Resistant

Double-molded rubber case design enhances reliability on the job site and durability for the long haul.

Convenience Features

• No need to select AC or DC Mode for quick tests
• Backlight features user-configurable timeout
• Large, sharp display is easy to see
• Tool-less battery changing
• Built-in tilt stand

Includes

• 6 AAA Batteries
• User Manual/CD
• CAT IV Silicon Test Leads
• Limited Lifetime Warranty

IM75 Industrial Insulation Tester and DMM Combination with VFD Mode and Bluetooth METERLiNK by FLIR

The FLIR IM75 is both an advanced multifunction digital multimeter and premier handheld insulation tester for installation, troubleshooting and maintenance professionals. The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption and Earth Bond Resistance. Insulation tests can be performed instantly, continuously and over a timed duration for in-depth assessment.

Features

• Combo Insulation / DMM in One: Have all the functions you need in one combination package – don’t run to the truck mid job for another meter!
• Advanced Insulation Modes: Confirm your insulation resistance Insulation Resistance up to 20 GΩ, PI, DAR, Earth Bond Resistance
• Versatile: Multiple ranges of resistance insulation test levels available for testing electrical power lines down to telecom and low voltage systems via rotary switch: 50V, 100V, 250V, 500V, 1000V
• Easy Compare: When reviewing results in Compare Mode, the dedicated Pass / Fail multi-color LED indicator makes determinations clear and visible. (NOTE COLORS)
• DMM Built-in: True RMS DMM measurements features reliable performance and 1000V range
• VFD Mode: Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.
• METERLiNK Compatibility: Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
• Bluetooth Connectivity: Connect to iOS™ and Android™ devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
• Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
• Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability (IP54, 2m Drop Test).
• Ready for work: Lots of accessories included: TA81 silicone CAT IV test leads with screw on silicone insulated alligator clips, TA50 Magnetic magnetic hanging strap, 6 x AAA batteries, User manual/CD

Includes

• TA81 CAT IV Silicone Insulated Test Probes with screw on insulated alligator clips
• TA50 Magnetic hanging strap
• 6 x AAA batteries
• User manual/CD

MR77 Pinless Moisture Pyschrometer by FLIR

The new FLIR MR77 is a rugged, feature-packed moisture meter incorporating a pinless sensor and a wired pin probe to capture moisture readings up to 0.75” below the surface of various wood types and building materials. The unit also incorporates a laser-spot IR thermometer, a field-replaceable temperature/humidity sensor, and High/Low moisture and humidity alarms.

Features

• Pinless Moisture Sensor: Capture accurate, non-destructive moisture readings up to 0.75" below material surfaces using the integrated pinless sensor.
• Wired Pin Probe: Monitor moisture levels in hard-to-reach areas using the FLIR MR77's external pin probe on 30" wire.
• Built-in IR Thermometer: Quickly capture spot temperatures using the non-contact, IR thermometer with laser spot.
• Intuitive Display: Large, clear LCD screen simultaneously displays moisture, relative humidity, and air temperatures.
• Bluetooth Connectivity: Upload data to FLIR Tools Mobile software so you can easily turn moisture/environmental trending graphs into professional reports.
• METERLiNK Compatibility: Embed moisture readings into thermal images from METERLiNK-enabled FLIR IR cameras for enhanced documentation/reporting.
• Shock-Resistant: Double-molded, rubberized case is shock-resistant from drops from as high as two meters to bolster reliability and durability.
• Rugged Design: CDesigned to resist contamination, the temperature/humidity sensor is field replaceable to keep the unit in action on the job site.

Includes

• 9V Battery
• User Manual/CD
• Temperature/RH Sensor
• Wired Pin Probe
• Limited Lifetime Warranty

MR77-NISTL Pinless Moisture Pyschrometer with Limited NIST by FLIR

The new FLIR MR77 is a rugged, feature-packed moisture meter incorporating a pinless sensor and a wired pin probe to capture moisture readings up to 0.75” below the surface of various wood types and building materials. The unit also incorporates a laser-spot IR thermometer, a field-replaceable temperature/humidity sensor, and High/Low moisture and humidity alarms.

Features

• Pinless Moisture Sensor: Capture accurate, non-destructive moisture readings up to 0.75" below material surfaces using the integrated pinless sensor.
• Wired Pin Probe: Monitor moisture levels in hard-to-reach areas using the FLIR MR77's external pin probe on 30" wire.
• Built-in IR Thermometer: Quickly capture spot temperatures using the non-contact, IR thermometer with laser spot.
• Intuitive Display: Large, clear LCD screen simultaneously displays moisture, relative humidity, and air temperatures.
• Bluetooth Connectivity: Upload data to FLIR Tools Mobile software so you can easily turn moisture/environmental trending graphs into professional reports.
• METERLiNK Compatibility: Embed moisture readings into thermal images from METERLiNK-enabled FLIR IR cameras for enhanced documentation/reporting.
• Shock-Resistant: Double-molded, rubberized case is shock-resistant from drops from as high as two meters to bolster reliability and durability.
• Rugged Design: CDesigned to resist contamination, the temperature/humidity sensor is field replaceable to keep the unit in action on the job site.

Includes

• 9V Battery
• User Manual/CD
• Temperature/RH Sensor
• Wired Pin Probe
• Limited Lifetime Warranty

VP50 Vibrating NCV with Flashlight by FLIR

The FLIR VP50 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts – tactile vibration and red LED alarms, a powerful LED flashlight, and versatile voltage sensitivities. We engineered the FLIR VP50 to reliably detect voltages on the latest tamperproof outlets and electrical systems installed using modern construction methods.

Features

• Enhanced Detection: Uses a low-profile probe tip that gets the sensor closer to electrical sources and enhanced sensitivity to help detect voltage in the latest safety outlets.
• Powerful Worklights: Intense (60-lumen) LED light source illuminates dimly lit locations – dual-LED convenience light at the probe tip lights up inspection targets.
• Tactile Alarms: Multi-color flashing LEDs and vibration alarms make it harder to miss the presence of voltage (up to 1000V) in noisy environments.
• High/Low Sensitivity: Detect voltage in electrical systems in large industrial facilities, residential low voltage installations, and systems located behind obstructions (using High Sensitivity mode).
• Intelligent Design: Anti-roll case design and extruded grip reduces likelihood of drops, and features such as delayed start up, auto power off, and low battery indicator maximize battery life.
• Rugged & Durable: Robust battery door and pocket clip design is engineered for long product life cycles, and the low profile detection tip bolsters a common weak point.

TG165 Imaging IR Thermometer with MSX 80 x 60 Resolution/9Hz by FLIR

The FLIR TG165 Imaging IR Thermometer bridges the gap between single spot infrared thermometers and FLIR’s legendary thermal cameras. Equipped with FLIR's exclusive Lepton® micro thermal sensor, the TG165 lets you see the heat so you know where to reliably measure it. Easily find unseen hot and cold spots for instant troubleshooting, and store images and data to show customers and include in reports.

See the Heat°™ - Speed Troubleshooting

• Instantly shows what's hot and where to aim
• Eliminates blind guesswork
• 24:1 spot size ratio for safer distance measuring

Grab and Go Simplicity

• Intuitive to operate with no special training required
• Easily save images and data for documentation
• Download images fast over USB or from removable micro SD

Rugged and Reliable

• Built to withstand a 2 meter drop
• Covered by FLIR’s exclusive 2-10 warranty
• Compact and durable to easily stow in a crowded tool bag

TG165-NIST Imaging IR Thermometer with MSX 80 x 60 Resolution/9Hz and NIST by FLIR

The FLIR TG165 Imaging IR Thermometer bridges the gap between single spot infrared thermometers and FLIR’s legendary thermal cameras. Equipped with FLIR's exclusive Lepton® micro thermal sensor, the TG165 lets you see the heat so you know where to reliably measure it. Easily find unseen hot and cold spots for instant troubleshooting, and store images and data to show customers and include in reports.

See the Heat°™ - Speed Troubleshooting

• Instantly shows what's hot and where to aim
• Eliminates blind guesswork
• 24:1 spot size ratio for safer distance measuring

Grab and Go Simplicity

• Intuitive to operate with no special training required
• Easily save images and data for documentation
• Download images fast over USB or from removable micro SD

Rugged and Reliable

• Built to withstand a 2 meter drop
• Covered by FLIR’s exclusive 2-10 warranty
• Compact and durable to easily stow in a crowded tool bag

IM75-NIST Industrial Insulation Tester and DMM Combination with VFD Mode Bluetooth METERLiNK and NIST by FLIR

The FLIR IM75 is both an advanced multifunction digital multimeter and premier handheld insulation tester for installation, troubleshooting and maintenance professionals. The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption and Earth Bond Resistance. Insulation tests can be performed instantly, continuously and over a timed duration for in-depth assessment.

Features

• Combo Insulation / DMM in One: Have all the functions you need in one combination package – don’t run to the truck mid job for another meter!
• Advanced Insulation Modes: Confirm your insulation resistance Insulation Resistance up to 20 GΩ, PI, DAR, Earth Bond Resistance
• Versatile: Multiple ranges of resistance insulation test levels available for testing electrical power lines down to telecom and low voltage systems via rotary switch: 50V, 100V, 250V, 500V, 1000V
• Easy Compare: When reviewing results in Compare Mode, the dedicated Pass / Fail multi-color LED indicator makes determinations clear and visible. (NOTE COLORS)
• DMM Built-in: True RMS DMM measurements features reliable performance and 1000V range
• VFD Mode: Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.
• METERLiNK Compatibility: Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
• Bluetooth Connectivity: Connect to iOS™ and Android™ devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
• Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
• Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability (IP54, 2m Drop Test).
• Ready for work: Lots of accessories included: TA81 silicone CAT IV test leads with screw on silicone insulated alligator clips, TA50 Magnetic magnetic hanging strap, 6 x AAA batteries, User manual/CD

Includes

• TA81 CAT IV Silicone Insulated Test Probes with screw on insulated alligator clips
• TA50 Magnetic hanging strap
• 6 x AAA batteries
• User manual/CD

CM42 400A AC Digital TRMS Clamp Meter by FLIR

The FLIR CM4X Clamp Meter Family includes three professional and affordable True RMS meters designed for commercial and residential electricians. The CM42 and CM44 feature AC clamp measurement, and the CM46 offers both AC/DC measurement to meet your unique needs. Each meter is equipped with a bright backlit display for ease of use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately - to a tenth of a digit. All models offer MAX/MIN/AVG recording, frequency measurement, and electrical field detection to help you determine voltage presence and relative strength of the field. Made with an over-molded, easy-to-grip design, the CM4X clamp meter family is durable enough to withstand a two-meter drop, and the slim form factor is convenient to carry in your toolbag anywhere you go.

Precise, accurate measurements

• Accu-Tip enables more accurate amperage measurements on smallergauged wires
• MAX/MIN/AVG recording, and frequency and diode measurement
• Data hold, zero function, and low pass filter (VFD) for voltage measurement

Engineering you can have confidence in

• Durable to withstand a 2-meter drop, and operates at -10 to 50°C (14 to 122°)
• Large, bright backlit display makes readings easy to see
• Tough, over-molded, easy-to-grip design and slim, portable size

Professional performance at an affordable price

• Built to accept up to a 30mm max conductor
• Electrical field detection (NCV) determines if voltage is present and the relative strength of the field for safety
• True RMS professional clamp meters

CM42-NIST 400A AC Digital TRMS Clamp Meter with NIST by FLIR

The FLIR CM4X Clamp Meter Family includes three professional and affordable True RMS meters designed for commercial and residential electricians. The CM42 and CM44 feature AC clamp measurement, and the CM46 offers both AC/DC measurement to meet your unique needs. Each meter is equipped with a bright backlit display for ease of use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately - to a tenth of a digit. All models offer MAX/MIN/AVG recording, frequency measurement, and electrical field detection to help you determine voltage presence and relative strength of the field. Made with an over-molded, easy-to-grip design, the CM4X clamp meter family is durable enough to withstand a two-meter drop, and the slim form factor is convenient to carry in your toolbag anywhere you go.

Precise, accurate measurements

• Accu-Tip enables more accurate amperage measurements on smallergauged wires
• MAX/MIN/AVG recording, and frequency and diode measurement
• Data hold, zero function, and low pass filter (VFD) for voltage measurement

Engineering you can have confidence in

• Durable to withstand a 2-meter drop, and operates at -10 to 50°C (14 to 122°)
• Large, bright backlit display makes readings easy to see
• Tough, over-molded, easy-to-grip design and slim, portable size

Professional performance at an affordable price

• Built to accept up to a 30mm max conductor
• Electrical field detection (NCV) determines if voltage is present and the relative strength of the field for safety
• True RMS professional clamp meters

CM44 400A AC Digital TRMS Clamp Meter with Type K by FLIR

The FLIR CM4X Clamp Meter Family includes three professional and affordable True RMS meters designed for commercial and residential electricians. The CM42 and CM44 feature AC clamp measurement, and the CM46 offers both AC/DC measurement to meet your unique needs. Each meter is equipped with a bright backlit display for ease of use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately - to a tenth of a digit. All models offer MAX/MIN/AVG recording, frequency measurement, and electrical field detection to help you determine voltage presence and relative strength of the field. Made with an over-molded, easy-to-grip design, the CM4X clamp meter family is durable enough to withstand a two-meter drop, and the slim form factor is convenient to carry in your toolbag anywhere you go.

Precise, accurate measurements

• Accu-Tip enables more accurate amperage measurements on smallergauged wires
• MAX/MIN/AVG recording, and frequency and diode measurement
• Data hold, zero function, and low pass filter (VFD) for voltage measurement

Engineering you can have confidence in

• Durable to withstand a 2-meter drop, and operates at -10 to 50°C (14 to 122°)
• Large, bright backlit display makes readings easy to see
• Tough, over-molded, easy-to-grip design and slim, portable size

Professional performance at an affordable price

• Built to accept up to a 30mm max conductor
• Electrical field detection (NCV) determines if voltage is present and the relative strength of the field for safety
• True RMS professional clamp meters

CM44-NIST 400A AC Digital TRMS Clamp Meter with Type K and NIST by FLIR

The FLIR CM4X Clamp Meter Family includes three professional and affordable True RMS meters designed for commercial and residential electricians. The CM42 and CM44 feature AC clamp measurement, and the CM46 offers both AC/DC measurement to meet your unique needs. Each meter is equipped with a bright backlit display for ease of use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately - to a tenth of a digit. All models offer MAX/MIN/AVG recording, frequency measurement, and electrical field detection to help you determine voltage presence and relative strength of the field. Made with an over-molded, easy-to-grip design, the CM4X clamp meter family is durable enough to withstand a two-meter drop, and the slim form factor is convenient to carry in your toolbag anywhere you go.

Precise, accurate measurements

• Accu-Tip enables more accurate amperage measurements on smallergauged wires
• MAX/MIN/AVG recording, and frequency and diode measurement
• Data hold, zero function, and low pass filter (VFD) for voltage measurement

Engineering you can have confidence in

• Durable to withstand a 2-meter drop, and operates at -10 to 50°C (14 to 122°)
• Large, bright backlit display makes readings easy to see
• Tough, over-molded, easy-to-grip design and slim, portable size

Professional performance at an affordable price

• Built to accept up to a 30mm max conductor
• Electrical field detection (NCV) determines if voltage is present and the relative strength of the field for safety
• True RMS professional clamp meters

CM46 400A AC / DC Digital TRMS Clamp Meter with Type K by FLIR

The FLIR CM4X Clamp Meter Family includes three professional and affordable True RMS meters designed for commercial and residential electricians. The CM42 and CM44 feature AC clamp measurement, and the CM46 offers both AC/DC measurement to meet your unique needs. Each meter is equipped with a bright backlit display for ease of use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately - to a tenth of a digit. All models offer MAX/MIN/AVG recording, frequency measurement, and electrical field detection to help you determine voltage presence and relative strength of the field. Made with an over-molded, easy-to-grip design, the CM4X clamp meter family is durable enough to withstand a two-meter drop, and the slim form factor is convenient to carry in your toolbag anywhere you go.

Precise, accurate measurements

• Accu-Tip enables more accurate amperage measurements on smallergauged wires
• MAX/MIN/AVG recording, and frequency and diode measurement
• Data hold, zero function, and low pass filter (VFD) for voltage measurement

Engineering you can have confidence in

• Durable to withstand a 2-meter drop, and operates at -10 to 50°C (14 to 122°)
• Large, bright backlit display makes readings easy to see
• Tough, over-molded, easy-to-grip design and slim, portable size

Professional performance at an affordable price

• Built to accept up to a 30mm max conductor
• Electrical field detection (NCV) determines if voltage is present and the relative strength of the field for safety
• True RMS professional clamp meters

CM46-NIST 400A AC / DC Digital TRMS Clamp Meter with Type K and NIST by FLIR

The FLIR CM4X Clamp Meter Family includes three professional and affordable True RMS meters designed for commercial and residential electricians. The CM42 and CM44 feature AC clamp measurement, and the CM46 offers both AC/DC measurement to meet your unique needs. Each meter is equipped with a bright backlit display for ease of use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately - to a tenth of a digit. All models offer MAX/MIN/AVG recording, frequency measurement, and electrical field detection to help you determine voltage presence and relative strength of the field. Made with an over-molded, easy-to-grip design, the CM4X clamp meter family is durable enough to withstand a two-meter drop, and the slim form factor is convenient to carry in your toolbag anywhere you go.

Precise, accurate measurements

• Accu-Tip enables more accurate amperage measurements on smallergauged wires
• MAX/MIN/AVG recording, and frequency and diode measurement
• Data hold, zero function, and low pass filter (VFD) for voltage measurement

Engineering you can have confidence in

• Durable to withstand a 2-meter drop, and operates at -10 to 50°C (14 to 122°)
• Large, bright backlit display makes readings easy to see
• Tough, over-molded, easy-to-grip design and slim, portable size

Professional performance at an affordable price

• Built to accept up to a 30mm max conductor
• Electrical field detection (NCV) determines if voltage is present and the relative strength of the field for safety
• True RMS professional clamp meters

CM55 Flexible Clamp Meter with LCD and Bluetooth, 10" Flex Coil by FLIR

The FLIR Flexible Clamp Meters with Bluetooth® are ergonomic tools designed to simplify difficult current measurements. Made with a narrow flexible coil clamp, the CM55 and CM57 let you easily take measurements in tight or awkward spots- a difficult task with a traditional hard jaw clamp meter. With Bluetooth communication for remote viewing and data transfer to iOS® and Android™ devices via the FLIR Tools Mobile App, you can analyze and share data fast right from the jobsite.

TAKE ACCURATE MEASUREMENTS IN TIGHT OR AWKWARD SPOTS

• Snake the coil around obstacles with ease, even in deep, crowded cabinets
• True RMS AC Current up to 3,000 Amps for multiple conductor measurements
• Inrush current function for equipment start-up spikes

EASY INSPECTION AND NAVIGATION

• Standalone flexible clamp meter displays the readings you need
• Bright, dual LED worklights provide built-in illumination for dark cabinets
• Drop tested to 3 meters, portable, lightweight, and tangle-free without compromising measurement range

REMOTE VIEWING FROM A SAFE DISTANCE

• Connect to iOS and Android smartphones or tablets
• Multiple units wirelessly connect for remote viewing of multiphase systems
• Data recording for trend analysis transferable via Bluetooth

CHOOSE FROM TWO FLEXIBLE COIL LENGTHS

• CM55 - 10" (25.4cm) for easy maneuverability and compact convenience
• CM57 - 18" (45.72 cm) for larger and multiple conductor measurements, double-wrap requirements, and deeper access

CM55-NIST Flexible Clamp Meter with LCD and Bluetooth, 10" Flex Coil with NIST by FLIR

The FLIR Flexible Clamp Meters with Bluetooth® are ergonomic tools designed to simplify difficult current measurements. Made with a narrow flexible coil clamp, the CM55 and CM57 let you easily take measurements in tight or awkward spots- a difficult task with a traditional hard jaw clamp meter. With Bluetooth communication for remote viewing and data transfer to iOS® and Android™ devices via the FLIR Tools Mobile App, you can analyze and share data fast right from the jobsite.

TAKE ACCURATE MEASUREMENTS IN TIGHT OR AWKWARD SPOTS

• Snake the coil around obstacles with ease, even in deep, crowded cabinets
• True RMS AC Current up to 3,000 Amps for multiple conductor measurements
• Inrush current function for equipment start-up spikes

EASY INSPECTION AND NAVIGATION

• Standalone flexible clamp meter displays the readings you need
• Bright, dual LED worklights provide built-in illumination for dark cabinets
• Drop tested to 3 meters, portable, lightweight, and tangle-free without compromising measurement range

REMOTE VIEWING FROM A SAFE DISTANCE

• Connect to iOS and Android smartphones or tablets
• Multiple units wirelessly connect for remote viewing of multiphase systems
• Data recording for trend analysis transferable via Bluetooth

CHOOSE FROM TWO FLEXIBLE COIL LENGTHS

• CM55 - 10" (25.4cm) for easy maneuverability and compact convenience
• CM57 - 18" (45.72 cm) for larger and multiple conductor measurements, double-wrap requirements, and deeper access

CM57 Flexible Clamp Meter with LCD and Bluetooth, 18" Flex Coil by FLIR

The FLIR Flexible Clamp Meters with Bluetooth® are ergonomic tools designed to simplify difficult current measurements. Made with a narrow flexible coil clamp, the CM55 and CM57 let you easily take measurements in tight or awkward spots- a difficult task with a traditional hard jaw clamp meter. With Bluetooth communication for remote viewing and data transfer to iOS® and Android™ devices via the FLIR Tools Mobile App, you can analyze and share data fast right from the jobsite.

TAKE ACCURATE MEASUREMENTS IN TIGHT OR AWKWARD SPOTS

• Snake the coil around obstacles with ease, even in deep, crowded cabinets
• True RMS AC Current up to 3,000 Amps for multiple conductor measurements
• Inrush current function for equipment start-up spikes

EASY INSPECTION AND NAVIGATION

• Standalone flexible clamp meter displays the readings you need
• Bright, dual LED worklights provide built-in illumination for dark cabinets
• Drop tested to 3 meters, portable, lightweight, and tangle-free without compromising measurement range

REMOTE VIEWING FROM A SAFE DISTANCE

• Connect to iOS and Android smartphones or tablets
• Multiple units wirelessly connect for remote viewing of multiphase systems
• Data recording for trend analysis transferable via Bluetooth

CHOOSE FROM TWO FLEXIBLE COIL LENGTHS

• CM55 - 10" (25.4cm) for easy maneuverability and compact convenience
• CM57 - 18" (45.72 cm) for larger and multiple conductor measurements, double-wrap requirements, and deeper access

CM57-NIST Clamp Meter with LCD and Bluetooth, 18" Flex Coil with NIST by FLIR

The FLIR Flexible Clamp Meters with Bluetooth® are ergonomic tools designed to simplify difficult current measurements. Made with a narrow flexible coil clamp, the CM55 and CM57 let you easily take measurements in tight or awkward spots- a difficult task with a traditional hard jaw clamp meter. With Bluetooth communication for remote viewing and data transfer to iOS® and Android™ devices via the FLIR Tools Mobile App, you can analyze and share data fast right from the jobsite.

TAKE ACCURATE MEASUREMENTS IN TIGHT OR AWKWARD SPOTS

• Snake the coil around obstacles with ease, even in deep, crowded cabinets
• True RMS AC Current up to 3,000 Amps for multiple conductor measurements
• Inrush current function for equipment start-up spikes

EASY INSPECTION AND NAVIGATION

• Standalone flexible clamp meter displays the readings you need
• Bright, dual LED worklights provide built-in illumination for dark cabinets
• Drop tested to 3 meters, portable, lightweight, and tangle-free without compromising measurement range

REMOTE VIEWING FROM A SAFE DISTANCE

• Connect to iOS and Android smartphones or tablets
• Multiple units wirelessly connect for remote viewing of multiphase systems
• Data recording for trend analysis transferable via Bluetooth

CHOOSE FROM TWO FLEXIBLE COIL LENGTHS

• CM55 - 10" (25.4cm) for easy maneuverability and compact convenience
• CM57 - 18" (45.72 cm) for larger and multiple conductor measurements, double-wrap requirements, and deeper access

CM72 Commercial 600A AC Clamp Meter by FLIR

The FLIR CM72 600A AC Clamp Meter and the CM74 600A AC/DC Clamp Meter give you better access to wiring in hard-to-reach places, and provide all the measurement capabilities you need for advanced troubleshooting. Made with a narrow jaw and high-powered LED worklights, the CM72 and CM74 make it easier to take measurements in dark, crowded panels and cabinets. Their slim, light design is convenient to carry in your back pocket wherever you go. With advanced electrical features including Autoranging, True RMS Voltage and Current, LoZ, Inrush (CM74 only), VFD Mode (CM74 only), and an input for a flexible current probe accessory, the CM72 and CM74 have all the measurement functions you need to stay competitive and ensure accurate readings.

Better clamp access and portability

• Made with a narrow jaw for easy access to wiring in crowded panels and cabinets
• Slim clamp design makes it convenient to carry in your back pocket
• Dual bright high-powered LED worklights guide you to your target in poor lighting conditions

All the electrical features you need

• Advanced electrical features including: True RMS, LoZ, VFD Mode (CM74 only), Inrush (CM74 only), Smart Diode with Disable
• Expandable to 3000A AC with TA72 & TA74 Flex Clamp Accessories (sold separately)
• Min / Max, Hold and Auto Power Off with Disable

Engineering you can have confidence in

• Premium gold-tipped silicone test lead accessories included
• Large digit LCD display with bright backlight
• Rubberized double molded hand grips reduce slippage

CM72-NIST Commercial 600A AC Clamp Meter with NIST by FLIR

The FLIR CM72 600A AC Clamp Meter and the CM74 600A AC/DC Clamp Meter give you better access to wiring in hard-to-reach places, and provide all the measurement capabilities you need for advanced troubleshooting. Made with a narrow jaw and high-powered LED worklights, the CM72 and CM74 make it easier to take measurements in dark, crowded panels and cabinets. Their slim, light design is convenient to carry in your back pocket wherever you go. With advanced electrical features including Autoranging, True RMS Voltage and Current, LoZ, Inrush (CM74 only), VFD Mode (CM74 only), and an input for a flexible current probe accessory, the CM72 and CM74 have all the measurement functions you need to stay competitive and ensure accurate readings.

Better clamp access and portability

• Made with a narrow jaw for easy access to wiring in crowded panels and cabinets
• Slim clamp design makes it convenient to carry in your back pocket
• Dual bright high-powered LED worklights guide you to your target in poor lighting conditions

All the electrical features you need

• Advanced electrical features including: True RMS, LoZ, VFD Mode (CM74 only), Inrush (CM74 only), Smart Diode with Disable
• Expandable to 3000A AC with TA72 & TA74 Flex Clamp Accessories (sold separately)
• Min / Max, Hold and Auto Power Off with Disable

Engineering you can have confidence in

• Premium gold-tipped silicone test lead accessories included
• Large digit LCD display with bright backlight
• Rubberized double molded hand grips reduce slippage

CM74 Commercial 600A AC / DC Clamp Meter by FLIR

The FLIR CM72 600A AC Clamp Meter and the CM74 600A AC/DC Clamp Meter give you better access to wiring in hard-to-reach places, and provide all the measurement capabilities you need for advanced troubleshooting. Made with a narrow jaw and high-powered LED worklights, the CM72 and CM74 make it easier to take measurements in dark, crowded panels and cabinets. Their slim, light design is convenient to carry in your back pocket wherever you go. With advanced electrical features including Autoranging, True RMS Voltage and Current, LoZ, Inrush (CM74 only), VFD Mode (CM74 only), and an input for a flexible current probe accessory, the CM72 and CM74 have all the measurement functions you need to stay competitive and ensure accurate readings.

Better clamp access and portability

• Made with a narrow jaw for easy access to wiring in crowded panels and cabinets
• Slim clamp design makes it convenient to carry in your back pocket
• Dual bright high-powered LED worklights guide you to your target in poor lighting conditions

All the electrical features you need

• Advanced electrical features including: True RMS, LoZ, VFD Mode (CM74 only), Inrush (CM74 only), Smart Diode with Disable
• Expandable to 3000A AC with TA72 & TA74 Flex Clamp Accessories (sold separately)
• Min / Max, Hold and Auto Power Off with Disable

Engineering you can have confidence in

• Premium gold-tipped silicone test lead accessories included
• Large digit LCD display with bright backlight
• Rubberized double molded hand grips reduce slippage

CM74-NIST Commercial 600A AC / DC Clamp Meter with NIST by FLIR

The FLIR CM72 600A AC Clamp Meter and the CM74 600A AC/DC Clamp Meter give you better access to wiring in hard-to-reach places, and provide all the measurement capabilities you need for advanced troubleshooting. Made with a narrow jaw and high-powered LED worklights, the CM72 and CM74 make it easier to take measurements in dark, crowded panels and cabinets. Their slim, light design is convenient to carry in your back pocket wherever you go. With advanced electrical features including Autoranging, True RMS Voltage and Current, LoZ, Inrush (CM74 only), VFD Mode (CM74 only), and an input for a flexible current probe accessory, the CM72 and CM74 have all the measurement functions you need to stay competitive and ensure accurate readings.

Better clamp access and portability

• Made with a narrow jaw for easy access to wiring in crowded panels and cabinets
• Slim clamp design makes it convenient to carry in your back pocket
• Dual bright high-powered LED worklights guide you to your target in poor lighting conditions

All the electrical features you need

• Advanced electrical features including: True RMS, LoZ, VFD Mode (CM74 only), Inrush (CM74 only), Smart Diode with Disable
• Expandable to 3000A AC with TA72 & TA74 Flex Clamp Accessories (sold separately)
• Min / Max, Hold and Auto Power Off with Disable

Engineering you can have confidence in

• Premium gold-tipped silicone test lead accessories included
• Large digit LCD display with bright backlight
• Rubberized double molded hand grips reduce slippage

CM174 600A AC / DC Imaging Clamp Meter with IGM by FLIR

The FLIR CM174 Imaging 600A AC/DC Clamp Meter with IGM is the first clamp meter equipped with a built-in thermal imager that can quickly lead you to problems you can't see with a standard clamp meter. Featuring Infrared Guided Measurement (IGM) technology, the CM174 visually guides you to the precise location of a potential electrical problem, identifying dangerous and unknown problem areas safely. Confirm your findings with accurate amperage and voltage measurements, and center-point temperature readings. The narrow jaw enables greater accessibility, and its compact form-factor fits easily into your back pocket - so you can have thermal imaging at your fingertips everywhere you go. The FLIR CM174 will quickly become your primary electrical troubleshooting tool.

Find problems faster with IGM

• Conquer cluttered wires and cables - IGM can quickly guide you in the right direction
• All-in-one tool - carry just one device and always have access to thermal imaging
• Work safely - scan a panel or cabinet for hazards using IGM without direct contact

Confirm your findings

• Center-point temperature to confirm hot spot
• Amperage and voltage measurements to check the load
• Laser and crosshair pinpoint the location of the problem found in thermal image

Solve complex electrical issues

• Narrow jaw and built-in worklights help you access difficult locations with lighting issues
• Advanced electrical features: True RMS, LoZ, VFD Mode, Inrush, Smart Diode with Disable
• Expandable to 3000 Amps AC with FLIR flex accessories

CM174-NIST 600A AC / DC Imaging Clamp Meter with IGM and NIST by FLIR

The FLIR CM174 Imaging 600A AC/DC Clamp Meter with IGM is the first clamp meter equipped with a built-in thermal imager that can quickly lead you to problems you can't see with a standard clamp meter. Featuring Infrared Guided Measurement (IGM) technology, the CM174 visually guides you to the precise location of a potential electrical problem, identifying dangerous and unknown problem areas safely. Confirm your findings with accurate amperage and voltage measurements, and center-point temperature readings. The narrow jaw enables greater accessibility, and its compact form-factor fits easily into your back pocket - so you can have thermal imaging at your fingertips everywhere you go. The FLIR CM174 will quickly become your primary electrical troubleshooting tool.

Find problems faster with IGM

• Conquer cluttered wires and cables - IGM can quickly guide you in the right direction
• All-in-one tool - carry just one device and always have access to thermal imaging
• Work safely - scan a panel or cabinet for hazards using IGM without direct contact

Confirm your findings

• Center-point temperature to confirm hot spot
• Amperage and voltage measurements to check the load
• Laser and crosshair pinpoint the location of the problem found in thermal image

Solve complex electrical issues

• Narrow jaw and built-in worklights help you access difficult locations with lighting issues
• Advanced electrical features: True RMS, LoZ, VFD Mode, Inrush, Smart Diode with Disable
• Expandable to 3000 Amps AC with FLIR flex accessories

DM90 TRMS Digital Multimeter with Type K Temperature by FLIR

The DM90 is an affordable True RMS digital multimeter with a Type K Temperature function, an ideal tool for electricians, service technicians and HVAC professionals to have on the job. Equipped with rich features including LoZ, Variable Frequency Drive (VFD), and μA current measurement capability, the DM90 gives you trusted readings to troubleshoot and repair a wide range of electrical and electronic systems. The DM90 is shipped fully tested and calibrated, and with proper use, will provide years of reliable service.

Trusted readings

• Measures Voltage, Current, Frequency, Resistance, Continuity, Diode, Capacitance, and Temperature
• Features LoZ, VFD, uA measurement, Smart/Classic Diode modes
• Measures voltage up to 1000V AC/DC

Feature-rich DMM

• Powerful LED worklights eliminate need for flashlight in dim lighting
• Digital LCD display with bargraph, customizable, easy-to-use settings option menu, and onscreen programming menu navigation
• Min/Max/Avg, Peak Min/Max, Hold, Auto Hold, Auto Power Off with Disable
• Includes a built-in non-contact AC voltage detector

Built to last

• Provides industry-leading Limited Lifetime Warranty
• Made tough for protection against splashing water (IP54 rating), and withstands a 3-meter drop

DM284 Professional Imaging Multimeter with IGM by FLIR

The FLIR DM284 Imaging Multimeter with IGM is a professional, allin-one True RMS digital multimeter and thermal imager that can show you exactly where an electrical problem is to speed up troubleshooting. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160x120 FLIR thermal imager, the DM284 visually guides you to the precise location of an electrical problem, helping you pinpoint hot spots faster and more efficiently. IGM enables you to scan panels, connectors, and wires without requiring any direct contact - so you can do your job from a safe distance. Once you find an issue with IGM, the DM284 can verify and confirm findings with advanced contact measurement features to help solve the most complex electrical issues. Ideal for field electronics, commercial electric, light industrial, field service, and HVAC work.

Pinpoint problems quickly and safely with IGM

• See exactly where to measure with the 160x120-resolution FLIR thermal imager
• All-in-one tool – carry just one device and always have access to thermal imaging
• Scan a panel or cabinet for hazards using IGM without direct contact

Troubleshoot challenging problems with ease

• 18-function DMM including VFD mode, True RMS, LoZ, and NCV
• Thermocouple input
• View thermal and electrical thermocouple measurements simultaneously

Design and functionality vital to professionals

• Built-in worklights and a laser pointer help you access difficult locations with lighting issues and pinpoint the location of the problem in the thermal image
• Simple user interface and various thermal color palettes to choose from: Iron, Rainbow, Greyscale
• Durable and drop tested with 10-year warranty

DM284-KIT Professional Imaging Multimeter Kit includes DM284 + TA04-KIT by FLIR

The FLIR DM284 Imaging Multimeter with IGM is a professional, allin-one True RMS digital multimeter and thermal imager that can show you exactly where an electrical problem is to speed up troubleshooting. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160x120 FLIR thermal imager, the DM284 visually guides you to the precise location of an electrical problem, helping you pinpoint hot spots faster and more efficiently. IGM enables you to scan panels, connectors, and wires without requiring any direct contact - so you can do your job from a safe distance. Once you find an issue with IGM, the DM284 can verify and confirm findings with advanced contact measurement features to help solve the most complex electrical issues. Ideal for field electronics, commercial electric, light industrial, field service, and HVAC work.

Pinpoint problems quickly and safely with IGM

• See exactly where to measure with the 160x120-resolution FLIR thermal imager
• All-in-one tool – carry just one device and always have access to thermal imaging
• Scan a panel or cabinet for hazards using IGM without direct contact

Troubleshoot challenging problems with ease

• 18-function DMM including VFD mode, True RMS, LoZ, and NCV
• Thermocouple input
• View thermal and electrical thermocouple measurements simultaneously

Design and functionality vital to professionals

• Built-in worklights and a laser pointer help you access difficult locations with lighting issues and pinpoint the location of the problem in the thermal image
• Simple user interface and various thermal color palettes to choose from: Iron, Rainbow, Greyscale
• Durable and drop tested with 10-year warranty

DM284-FLEX-KIT Professional Imaging Multimeter Kit includes DM284-KIT + TA10-F + TA74 by FLIR

The FLIR DM284 Imaging Multimeter with IGM is a professional, allin-one True RMS digital multimeter and thermal imager that can show you exactly where an electrical problem is to speed up troubleshooting. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160x120 FLIR thermal imager, the DM284 visually guides you to the precise location of an electrical problem, helping you pinpoint hot spots faster and more efficiently. IGM enables you to scan panels, connectors, and wires without requiring any direct contact - so you can do your job from a safe distance. Once you find an issue with IGM, the DM284 can verify and confirm findings with advanced contact measurement features to help solve the most complex electrical issues. Ideal for field electronics, commercial electric, light industrial, field service, and HVAC work.

Pinpoint problems quickly and safely with IGM

• See exactly where to measure with the 160x120-resolution FLIR thermal imager
• All-in-one tool – carry just one device and always have access to thermal imaging
• Scan a panel or cabinet for hazards using IGM without direct contact

Troubleshoot challenging problems with ease

• 18-function DMM including VFD mode, True RMS, LoZ, and NCV
• Thermocouple input
• View thermal and electrical thermocouple measurements simultaneously

Design and functionality vital to professionals

• Built-in worklights and a laser pointer help you access difficult locations with lighting issues and pinpoint the location of the problem in the thermal image
• Simple user interface and various thermal color palettes to choose from: Iron, Rainbow, Greyscale
• Durable and drop tested with 10-year warranty

DM284-NIST Professional Imaging Multimeter with NIST by FLIR

The FLIR DM284 Imaging Multimeter with IGM is a professional, allin-one True RMS digital multimeter and thermal imager that can show you exactly where an electrical problem is to speed up troubleshooting. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160x120 FLIR thermal imager, the DM284 visually guides you to the precise location of an electrical problem, helping you pinpoint hot spots faster and more efficiently. IGM enables you to scan panels, connectors, and wires without requiring any direct contact - so you can do your job from a safe distance. Once you find an issue with IGM, the DM284 can verify and confirm findings with advanced contact measurement features to help solve the most complex electrical issues. Ideal for field electronics, commercial electric, light industrial, field service, and HVAC work.

Pinpoint problems quickly and safely with IGM

• See exactly where to measure with the 160x120-resolution FLIR thermal imager
• All-in-one tool – carry just one device and always have access to thermal imaging
• Scan a panel or cabinet for hazards using IGM without direct contact

Troubleshoot challenging problems with ease

• 18-function DMM including VFD mode, True RMS, LoZ, and NCV
• Thermocouple input
• View thermal and electrical thermocouple measurements simultaneously

Design and functionality vital to professionals

• Built-in worklights and a laser pointer help you access difficult locations with lighting issues and pinpoint the location of the problem in the thermal image
• Simple user interface and various thermal color palettes to choose from: Iron, Rainbow, Greyscale
• Durable and drop tested with 10-year warranty

MR40 Moisture Meter Pen by FLIR

The FLIR MR40 is a pocket-portable, rugged 2-pin, singlescale moisture meter with an integrated flashlight for wood and common building materials - ideal for builders, building inspectors, remodelers, moisture remediation technicians, pest control professionals, and residential roofing and flooring contractors. Providing reliable and accurate measurements offered at a highly affordable price point, MR40 is a quick and easy-to-use tool to find and quantify moisture content. When used in combination with a thermal camera, MR40 can help confirm whether a cold spot in a thermal image is moisture, and measure the severity of the problem.

Easy to use

• Clear LCD display
• Simple On/Off button with 'Auto Power Off'
• Replaceable pins (includes 2nd set)
• Audible indication of measured range (5- 12%, 13- 60%, 60%+)

Convenient, portable, rugged design

• Small enough to carry in your pocket and take measurements in tight spaces
• IP54 splash-proof rated, operating temperature: -10°C to 50°C
• 3-meter drop tested

Reliable and accurate measurements

• Measurement 'Hold' function
• Calibration/Pin check integrated in cap

MR60 Professional Moisture Meter by FLIR

The FLIR MR60 Moisture Meter Pro is an easy-to-use pin and pinless moisture meter with advanced functionality to meet all your professional measurement needs. An integrated pinless sensor and an external pin probe provide the flexibility to take either destructive or non-destructive measurements. Select one of the eleven material groups for pin moisture, or set a reference point for pinless moisture scanning. Conveniently save your measurements as screenshots and in a CSV file with the date, time, and settings. The MR60 is also compatible with FLIR’s full line of external moisture probes, so you have the flexibility to expand your meter as needed. Built portable and durable enough to withstand a 3-meter drop, you can take MR60 with you anywhere - even to your toughest jobs.

Flexibility to take both destructive and non-destructive measurements

• Quickly scan for moisture using the integrated non-invasive pinless moisture sensor
• External pin probe (included) for resistive moisture content measurements
• Pin or Pinless moisture readings are displayed with large digits and color bargraph

Advanced functionality to meet all your professional needs

• Save up to 10,000 screenshots and readings that you can transfer & view via PC/USB
• Eleven (11) material group selections for pin?based readings
• Programmable high moisture alarm with audible and color visual alerts

Simple to use and create reports

• Bright, easy-to-read color display
• Intuitive graphical user interface with helpful function labels in local languages
• File management & report generation with free FLIR Tools PC software

MR160 Imaging Moisture Meter by FLIR

The FLIR MR160 Imaging Moisture Meter is the first of its kind. Equipped with a built-in thermal camera, MR160 is the only moisture meter with the power to show you exactly where to measure.

Featuring Infrared Guided Measurement (IGM™) technology, the MR160 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings.

An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. Built tough with an industry-leading warranty, the MR160 can serve as your go-to troubleshooting tool right out of the box - or as the perfect complement to any high resolution thermal camera you already own - helping you find hidden moisture issues and capture reliable data more efficiently.

IDENTIFY AND VERIFY WITH ONE TOOL

• 80 x 60 Lepton® thermal imager powers IGM technology
• Document thermal images and moisture readings on one screen
• Review images and generate reports with free FLIR Tools software

TROUBLESHOOT QUICKLY

• Pinless technology for fast non-intrusive measurements
• External pin probe included for contact moisture measurements
• Easy targeting with laser pointer and display cross-hairs

PORTABLE, TOUGH AND DURABLE

• Industry-leading warranty
• Small form factor to conveniently carry with you
• Internal rechargeable battery with USB

MR160-KIT2 Building Inspection Kit includes FLIR C2 with MR160 and MR06 by FLIR

The FLIR MR160 Imaging Moisture Meter is the first of its kind. Equipped with a built-in thermal camera, MR160 is the only moisture meter with the power to show you exactly where to measure.

Featuring Infrared Guided Measurement (IGM™) technology, the MR160 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings.

An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. Built tough with an industry-leading warranty, the MR160 can serve as your go-to troubleshooting tool right out of the box - or as the perfect complement to any high resolution thermal camera you already own - helping you find hidden moisture issues and capture reliable data more efficiently.

IDENTIFY AND VERIFY WITH ONE TOOL

• 80 x 60 Lepton® thermal imager powers IGM technology
• Document thermal images and moisture readings on one screen
• Review images and generate reports with free FLIR Tools software

TROUBLESHOOT QUICKLY

• Pinless technology for fast non-intrusive measurements
• External pin probe included for contact moisture measurements
• Easy targeting with laser pointer and display cross-hairs

PORTABLE, TOUGH AND DURABLE

• Industry-leading warranty
• Small form factor to conveniently carry with you
• Internal rechargeable battery with USB

MR160-KIT5 Imaging Moisture Meter Pro Kit includes MR160 with MR08 Probe by FLIR

The FLIR MR160 Imaging Moisture Meter is the first of its kind. Equipped with a built-in thermal camera, MR160 is the only moisture meter with the power to show you exactly where to measure.

Featuring Infrared Guided Measurement (IGM™) technology, the MR160 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings.

An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. Built tough with an industry-leading warranty, the MR160 can serve as your go-to troubleshooting tool right out of the box - or as the perfect complement to any high resolution thermal camera you already own - helping you find hidden moisture issues and capture reliable data more efficiently.

IDENTIFY AND VERIFY WITH ONE TOOL

• 80 x 60 Lepton® thermal imager powers IGM technology
• Document thermal images and moisture readings on one screen
• Review images and generate reports with free FLIR Tools software

TROUBLESHOOT QUICKLY

• Pinless technology for fast non-intrusive measurements
• External pin probe included for contact moisture measurements
• Easy targeting with laser pointer and display cross-hairs

PORTABLE, TOUGH AND DURABLE

• Industry-leading warranty
• Small form factor to conveniently carry with you
• Internal rechargeable battery with USB

MR176 Imaging Moisture Meter Plus with IGM by FLIR

The FLIR MR176 Imaging Moisture Meter Plus with IGM™ is an all-in-one tool equipped with a built-in thermal camera that can show you exactly where to measure moisture. Featuring Infrared Guided Measurement (IGM) technology, the MR176 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either non-intrusive or intrusive measurements. Coupled with a field-replaceable temperature and relative humidity sensor, and automatically calculated environmental readings, the MR176 delivers added convenience and ease of use, producing the right measurements - faster.

Visually identify hidden moisture with IGM

• An 80 x 60, 4800-pixel Lepton® thermal imager powers IGM technology, visually indicating potential moisture areas via the color display
• Customize thermal images: select which measurements are integrated (moisture, temperature, relative humidity, dew point, vapor pressure, mixing ratio), and choose from one of four color palettes (Iron, Rainbow, Ice, Greyscale); a lock-image setting prevents extreme hot and cold temperatures from interfering with images while scanning for issues
• Equipped with a laser and cross hair to easily reference the exact location of the potential moisture issue seen in the thermal image

Get precise readings

• Field-replaceable temperature/relative humidity sensor can simply be removed from meter and exchanged when needed, so you can continue to work and reduce downtime
• Progressive Environmental Stability Indicator removes response time error when you move through a site to different measurement locations, informing you when the relative humidity readings have reached a steady state
• Integrated pinless moisture measurements for fast detection, and external pin probe included with expandable probe options

Convenient and easy to operate

• Rugged, portable design with intuitive menu system
• Document readings and images to share via included USB cable
• Free FLIR Tools PC software quickly generates reports

MR176-KIT5 Imaging Moisture Meter Pro Kit includes MR176 with MR08 and MR01 by FLIR

The FLIR MR176 Imaging Moisture Meter Plus with IGM™ is an all-in-one tool equipped with a built-in thermal camera that can show you exactly where to measure moisture. Featuring Infrared Guided Measurement (IGM) technology, the MR176 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either non-intrusive or intrusive measurements. Coupled with a field-replaceable temperature and relative humidity sensor, and automatically calculated environmental readings, the MR176 delivers added convenience and ease of use, producing the right measurements - faster.

Visually identify hidden moisture with IGM

• An 80 x 60, 4800-pixel Lepton® thermal imager powers IGM technology, visually indicating potential moisture areas via the color display
• Customize thermal images: select which measurements are integrated (moisture, temperature, relative humidity, dew point, vapor pressure, mixing ratio), and choose from one of four color palettes (Iron, Rainbow, Ice, Greyscale); a lock-image setting prevents extreme hot and cold temperatures from interfering with images while scanning for issues
• Equipped with a laser and cross hair to easily reference the exact location of the potential moisture issue seen in the thermal image

Get precise readings

• Field-replaceable temperature/relative humidity sensor can simply be removed from meter and exchanged when needed, so you can continue to work and reduce downtime
• Progressive Environmental Stability Indicator removes response time error when you move through a site to different measurement locations, informing you when the relative humidity readings have reached a steady state
• Integrated pinless moisture measurements for fast detection, and external pin probe included with expandable probe options

Convenient and easy to operate

• Rugged, portable design with intuitive menu system
• Document readings and images to share via included USB cable
• Free FLIR Tools PC software quickly generates reports

MR176-KIT6 Remediation Kit includes FLIR E6 with MR176 and MR08 by FLIR

The FLIR MR176 Imaging Moisture Meter Plus with IGM™ is an all-in-one tool equipped with a built-in thermal camera that can show you exactly where to measure moisture. Featuring Infrared Guided Measurement (IGM) technology, the MR176 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either non-intrusive or intrusive measurements. Coupled with a field-replaceable temperature and relative humidity sensor, and automatically calculated environmental readings, the MR176 delivers added convenience and ease of use, producing the right measurements - faster.

Visually identify hidden moisture with IGM

• An 80 x 60, 4800-pixel Lepton® thermal imager powers IGM technology, visually indicating potential moisture areas via the color display
• Customize thermal images: select which measurements are integrated (moisture, temperature, relative humidity, dew point, vapor pressure, mixing ratio), and choose from one of four color palettes (Iron, Rainbow, Ice, Greyscale); a lock-image setting prevents extreme hot and cold temperatures from interfering with images while scanning for issues
• Equipped with a laser and cross hair to easily reference the exact location of the potential moisture issue seen in the thermal image

Get precise readings

• Field-replaceable temperature/relative humidity sensor can simply be removed from meter and exchanged when needed, so you can continue to work and reduce downtime
• Progressive Environmental Stability Indicator removes response time error when you move through a site to different measurement locations, informing you when the relative humidity readings have reached a steady state
• Integrated pinless moisture measurements for fast detection, and external pin probe included with expandable probe options

Convenient and easy to operate

• Rugged, portable design with intuitive menu system
• Document readings and images to share via included USB cable
• Free FLIR Tools PC software quickly generates reports

TG54 Spot IR Thermometer 24:1 by FLIR

The TG54 and TG56 Spot IR (Infrared) Thermometers provide non-contact surface temperature readings so you can quickly and easily take measurements in places that are out of reach. Providing a distance-to-spot ratio of up to 30:1, the TG54 and TG56 can measure smaller targets from a safer distance. New mode options give you control to view your current reading and last two temperature readings simultaneously. The TG54 and TG56 are built with a color screen that makes it easy to navigate and select settings, plus adds visibility and efficiency to the advanced feature set. The TG54 and TG56 are your go-to, pocket-sized devices for efficient temperature measurement.

Measure high and low

• Take non-contact surface temperature measurements with IR (infrared) sensor
• 24:1 or 30:1 spot ratio to measure smaller targets from a safer distance
• Easily identify measurement location with built-in laser targeting

Simple to use

• Graphical menu structure allows easy access to settings
• Easy emissivity selection with predetermined levels and custom adjustment
• Stunning visual high and low alarms

Convenient and rugged design

• Rugged, industrial design that can withstand a three meter drop
• Bright worklight to help you see your target in poor lighting conditions
• Tool-less battery compartment

TG54-NIST Spot IR Thermometer 24:1 with NIST by FLIR

The TG54 and TG56 Spot IR (Infrared) Thermometers provide non-contact surface temperature readings so you can quickly and easily take measurements in places that are out of reach. Providing a distance-to-spot ratio of up to 30:1, the TG54 and TG56 can measure smaller targets from a safer distance. New mode options give you control to view your current reading and last two temperature readings simultaneously. The TG54 and TG56 are built with a color screen that makes it easy to navigate and select settings, plus adds visibility and efficiency to the advanced feature set. The TG54 and TG56 are your go-to, pocket-sized devices for efficient temperature measurement.

Measure high and low

• Take non-contact surface temperature measurements with IR (infrared) sensor
• 24:1 or 30:1 spot ratio to measure smaller targets from a safer distance
• Easily identify measurement location with built-in laser targeting

Simple to use

• Graphical menu structure allows easy access to settings
• Easy emissivity selection with predetermined levels and custom adjustment
• Stunning visual high and low alarms

Convenient and rugged design

• Rugged, industrial design that can withstand a three meter drop
• Bright worklight to help you see your target in poor lighting conditions
• Tool-less battery compartment

TG56 Spot IR Thermometer with Thermocouple 30:1 by FLIR

The TG54 and TG56 Spot IR (Infrared) Thermometers provide non-contact surface temperature readings so you can quickly and easily take measurements in places that are out of reach. Providing a distance-to-spot ratio of up to 30:1, the TG54 and TG56 can measure smaller targets from a safer distance. New mode options give you control to view your current reading and last two temperature readings simultaneously. The TG54 and TG56 are built with a color screen that makes it easy to navigate and select settings, plus adds visibility and efficiency to the advanced feature set. The TG54 and TG56 are your go-to, pocket-sized devices for efficient temperature measurement.

Measure high and low

• Take non-contact surface temperature measurements with IR (infrared) sensor
• 24:1 or 30:1 spot ratio to measure smaller targets from a safer distance
• Easily identify measurement location with built-in laser targeting

Simple to use

• Graphical menu structure allows easy access to settings
• Easy emissivity selection with predetermined levels and custom adjustment
• Stunning visual high and low alarms

Convenient and rugged design

• Rugged, industrial design that can withstand a three meter drop
• Bright worklight to help you see your target in poor lighting conditions
• Tool-less battery compartment

TG56-NIST Spot IR Thermometer with Thermocouple 30:1 with NIST by FLIR

The TG54 and TG56 Spot IR (Infrared) Thermometers provide non-contact surface temperature readings so you can quickly and easily take measurements in places that are out of reach. Providing a distance-to-spot ratio of up to 30:1, the TG54 and TG56 can measure smaller targets from a safer distance. New mode options give you control to view your current reading and last two temperature readings simultaneously. The TG54 and TG56 are built with a color screen that makes it easy to navigate and select settings, plus adds visibility and efficiency to the advanced feature set. The TG54 and TG56 are your go-to, pocket-sized devices for efficient temperature measurement.

Measure high and low

• Take non-contact surface temperature measurements with IR (infrared) sensor
• 24:1 or 30:1 spot ratio to measure smaller targets from a safer distance
• Easily identify measurement location with built-in laser targeting

Simple to use

• Graphical menu structure allows easy access to settings
• Easy emissivity selection with predetermined levels and custom adjustment
• Stunning visual high and low alarms

Convenient and rugged design

• Rugged, industrial design that can withstand a three meter drop
• Bright worklight to help you see your target in poor lighting conditions
• Tool-less battery compartment

74701-0104 TG167 Spot Thermal Camera 80 x 60 Resolution/9Hz by FLIR

The FLIR TG167 Spot Thermal Camera bridges the gap between single spot infrared thermometers and FLIR's legendary thermal cameras. Equipped with FLIR's exclusive Lepton® micro thermal sensor, the TG167 lets you see the heat so you know where to reliably measure it. Designed for indoor electrical inspection, the TG167 will help you easily find unseen hot and cold spots in electrical cabinets or switch boxes, giving you quality image detail on even small connectors and wires. Then you can store images and download data to show customers and include in reports.

See the Heat™ - Speed Electrical Troubleshooting

• Instantly shows what's hot and where to aim
• Eliminates blind guesswork
• 24:1 spot size ratio for safer distance measuring

Grab and Go Simplicity

• Intuitive to operate with no special training required
• Easily save images and data for documentation
• Download images fast over USB or from removable micro SD

Rugged and Reliable

• Built to withstand a 2 meter drop
• Covered by FLIR's exclusive 2-10 warranty
• Compact and durable to easily stow in a crowded tool bag

74401-0104 TG130 Spot Thermal Camera 80 x 60 Resolution/9Hz by FLIR

Save money on heating and cooling energy costs with the FLIR TG130 Spot Thermal Camera. Quickly find and troubleshoot temperature-related issues around the house and solve problems fast.

Reduce energy costs

• Find heat loss around doors, floors, walls, pipes, or windows
• Locate spots where insulation is missing
• Find drafts

Solve household heating/cooling issues

• Check HVAC performance and functionality
• Discover electrical issues affecting home appliances
• Confirm that refrigerator settings are correct, and food is stored at a safe temperature

Point-and-click simplicity

• Pocket-portable size
• Ergonomic design
• Standard, easy-to-replace AAA batteries